Annexes to COM(2021)217 - Amendment of Regulation (EU) No 1387/2013 suspending the autonomous Common Customs Tariff duties on certain agricultural and industrial products

Please note

This page contains a limited version of this dossier in the EU Monitor.

dossier COM(2021)217 - Amendment of Regulation (EU) No 1387/2013 suspending the autonomous Common Customs Tariff duties on certain agricultural and ...
document COM(2021)217 EN
date June 18, 2021
ANNEX

The Annex to Regulation (EU) No 1387/2013 is amended as follows:

(1)the entries with the following serial numbers are deleted: 0.2938, 0.3108, 0.3139, 0.3141, 0.4179, 0.4197, 0.4734, 0.4735, 0.4883, 0.5312 and 0.5470;

(2)the following entries replace those entries that have the same serial numbers:

Serial numberCN codeTARICDescriptionRate of autonomous dutySupplementary UnitDate foreseen for mandatory review
‘0.3341ex 1515 90 9992Vegetable oil, refined or semi-refined, containing by weight 35 % or more but not more than 57 % of arachidonic acid or 35 % or more but not more than 50 % of docosahexaenoic acid0 %-31.12.2023
0.7674ex 2905 32 0020(2S)-propane-1,2-diol (CAS RN 4254-15-3) with a purity by weight of 98 % or more0 %-31.12.2023
0.6003ex 2915 90 7027Triethyl orthoformate (CAS RN 122-51-0) with a purity by weight of 99 % or more0 %-31.12.2023
0.3468ex 2916 13 0040Zinc Dimethacrylate (CAS RN 13189-00-9) in the form of powder with a purity by weight of 99 % or more, with not more than 1 % of a stabiliser0 %-31.12.2023
0.2941ex 2920 19 0040Tolclofos-methyl (ISO) (CAS RN 57018-04-9) with a purity by weight of 96 % or more0 %-31.12.2023
0.4298ex 2930 20 0040Prosulfocarb (ISO) (CAS RN 52888-80-9) with purity by weight of 97 % or more0 %-31.12.2022
0.5920ex 2933 29 9028Prochloraz (ISO) (CAS RN 67747-09-5) with purity by weight of 97 % or more0 %-31.12.2023
0.6987ex 2933 59 95526-Benzyladenine (CAS RN 1214-39-7) with a purity by weight of 97 % or more0 %-31.12.2021
0.7815ex 2934 99 9082Rel-(3aR,12bR)-11-Chloro-2,3,3a,12b-tetrahydro-2-methyl-1H-dibenz[2,3:6,7]oxepino[4,5-c]pyrrol-1-one (CAS RN 129385-59-7) with a purity by weight of 97 % or more0 %-31.12.2024
0.7975ex 3801 10 0030Artificial graphite in powder form, (CAS RN 7782-42-5) with:

—with or without coating on the surface,

—particle size represented by d50 value of 15 μm (± 4),

—specific surface area (measured by BET) less than 3,5 m2/g,

—tap density: 1,3 g/m3 (± 0,5),

—specific Discharge Capacity of 348 mAh/g (± 13),

—initial efficiency above 93,0 %
1.8 %-31.12.2021
0.4459ex 3919 90 8083Reflector or diffuser sheets, in rolls,

—for protection against ultraviolet or infra-red heat radiation, to be affixed to windows or

—for equal transmission and distribution of light, intended for LCD modules
0 %-31.12.2022
0.5139ex 3920 10 8955Ethylene vinyl acetate (EVA) film:

—with a raised relief surface with embossed undulations,

—not laminated,

—not cross-linked, and

—with a thickness of more than 0,3 mm
0 %-31.12.2021
0.5167ex 3920 20 2994Mono-axial oriented, co-extruded film:

—consisting of 3 to 5 layers,

—each layer mainly consisting of polypropylene and/or polyethylene,

—each layer containing not more than 10 % by weight of other polymers,

—whether or not containing titanium dioxide in the core layer,

—of an overall thickness of not more than 75 μm
0 %-31.12.2022
0.2546ex 6903 90 9040Silicon carbide reactor tubes and holders having a maximum service temperature of 1 370  °C or more0 %-31.12.2023
0.8028ex 6909 19 0040Ceramic-carbon absorption or adsorption cartridges of fuel motor vehicle systems, with the following characteristics:

—extruded fired ceramic bound multicellular cylindrical structure,

—5 % or more by weight but not more than 70 % by weight of activated carbon,

—30 % or more by weight but no more than 90 % by weight of ceramic binder,

—with a diameter of 29 mm or more but no more than 41 mm,

—a length of not more than 150 mm,

—fired at temperature of 800 °C or more
0 %p/st31.12.2025
0.6680ex 7326 90 98

ex 7907 00 00
40

10
Iron, steel and/or zinc alloy weights:

—with a weight of not more than 500 grams and measuring not more than 107 mm x 107 mm x 11 mm,

—whether or not with parts of other material,

—whether or not with parts of other metals,

—whether or not surface treated,

—whether or not printed,

of a kind used for the production of remote controls
0 %-31.12.2025
0.4050ex 7607 11 90

ex 7607 11 90
65

67
Plain aluminium foil with the following parameters:

—an aluminium content of 99,98 % or more,

—a thickness of 0,070 mm or more but not more than 0,125 mm,

—with a cubic texture,

of a kind used for high voltage etching
3.7 %-31.12.2021
0.7966ex 8104 19 0010Unwrought magnesium containing 90 % or more but not more than 99,7 % by weight of magnesium0 %-31.12.2025
0.5097ex 8104 30 0035Magnesium powder:

—of purity by weight of more than 99,5 %, and

—with a particle size of not more than 0,8 mm
0 %-31.12.2025
0.4133ex 8418 99 10

ex 8418 99 10
71

79
Evaporator made of aluminium for use in the manufacture of air conditioning machines for automobiles (1)0 %p/st31.12.2021
0.6858ex 8501 10 9964DC motor to control angular position of the flap to adjust gas flow in the Air Throttle and EGR valve:

—with Ingress Protection (IP) standard of IP69,

—with a rotor speed of not more than 6 500 rpm when not loaded,

—with a rated voltage of 12,0 V (± 0,1),

—of a specified temperature range of – 40 °C or more but not more than + 165 °C,

—with or without a connecting pinion,

—with or without an engine connector,

—with or without a flange,

—with a diameter of not more than 40 mm (not including the flange),

—with an overall height of not more than 90 mm (from the base to the pinion)
0 %-31.12.2021
0.6809ex 8501 31 00

ex 8501 32 00
43

55
Automotive-ready, brushless and permanently excited direct current motor with:

—a specified speed of not more than 4 100 rpm,

—a minimum output of 400 W, but not more than 1,3 kW (at 12V),

—a flange diameter of 85 mm or more but not more than 200 mm,

—a maximum length of 335 mm, measured from the beginning of the shaft to the outer ending,

—a housing length of not more than 265 mm, measured from the flange to the outer ending,

—a maximum of two-piece (basic housing including electric components and flange with minimum 2 and maximum 11 bore holes) aluminium diecast or sheet steel housing whether or not with a sealing compound (groove with an O-ring and grease),

—a stator with single T-tooth design and single coil windings in 9/6 or 12/8 topology, and

—surface magnets,

—whether or not with electronic power steering controller,

—whether or not with pulley,

—whether or not with rotor position sensor
0 %-31.12.2025
0.7641ex 8507 60 0058Prismatic lithium-ion electric accumulator with:

—a width of 120,0 mm or more but not more than 305,0 mm,

—a thickness of 12,0 mm or more but not more than 67,0 mm,

—a height of 72,0 mm or more but not more than 126,0 mm,

—a nominal voltage of 3,6 V or more but not more than 3,75 V, and

—a nominal capacity of 6,9 Ah or more not more than 265 Ah,

for use in the manufacture of rechargeable electric vehicle batteries (1)
1.3 %-31.12.2021
0.5356ex 8507 60 0075Rectangular lithium-ion-accumulator with:

—a metal casing,

—a length of 147,85 mm or more but not more than 173,15 mm,

—a width of 17,4 mm or more but not more than 21,1 mm,

—a height of 90,85 mm or more but not more than 95,15 mm,

—a nominal voltage of 3,3 V or more but not more than 3,65 V, and

—a nominal capacity of 17,5 Ah or more
1.3 %-31.12.2021
0.7856ex 8708 40 20

ex 8708 40 50
70

60
Manual gearbox in cast aluminium housing for transverse installation with:

—a width of not more than 480 mm,

—a height of not more than 400 mm,

—a length of not more than 550 mm,

—five or six gears,

—a differential gear,

—an engine torque of 400 Nm or less,

for use in the manufacture of motor vehicles of Heading 8703  (1)
0 %-31.12.2024
0.6583ex 8708 99 10

ex 8708 99 97
60

50
Aluminium engine bracket, with dimensions of:

—height of more than 10 mm but not more than 200 mm,

—width of more than 10 mm but not more than 250 mm,

—length of more than 10 mm but not more than 200 mm,

equipped with at least two fixing holes, made of aluminium alloys ENAC-46100 or ENAC-42100 (based on the norm EN:1706) with following characteristics:

—internal porosity not more than 1 mm,

—outer porosity not more than 2 mm,

—rockwell hardness HRB 10 or more,

of a kind used in the production of suspensions systems for engines in motor vehicles
0 %p/st31.12.2024
0.7101ex 9001 10 9040Fibre optic plates:

—uncoated and unpainted,

—of a length of 30 mm or more, but not more than 234,5 mm,

—of a width of 7 mm or more, but not more than 28 mm, and

—of a height of 0,5 mm or more, but not more than 3 mm,

of a kind used in dental x-ray systems
0 %-31.12.2021
0.7590ex 9002 11 0018Lens assembly consisting of a cylinder-shaped cover made of metal or plastic and optical elements with:

—a horizontal field of view range to a maximum of 120 deg,

—a diagonal field of view range to a maximum of 105 deg,

—a focal length to a maximum of 7,50 mm,

—a relative aperture of a maximum of F/2,90,

—a maximum diameter of 22 mm
0 %-31.12.2023

(3)the following entries are added or inserted according to the numerical order of the CN and TARIC codes in the second and third columns:

Serial numberCN codeTARICDescriptionRate of autonomous dutySupplementary UnitDate foreseen for mandatory review
‘0.8144ex 2710 12 2520Mixture of C6 aliphatic hydrocarbons (CAS RN 92112-69-1), containing by weight 60 % or more but not more than 80 % of n-hexane (CAS RN 110-54-3), with:

—a specific gravity of 0,666 or more but not more than 0,686,

—a total of carbonyl compounds of less than 1 ppm,

—a total of acetylenic compounds of less than 2 ppm
0 %-31.12.2025
0.8076ex 2903 99 80451-Bromo-4-(trans-4-propylcyclohexyl)benzene (CAS RN 86579-53-5) with a purity by weight of 95 % or more0 %-31.12.2025
0.8101ex 2903 99 80551-Bromo-4-(trans-4-ethylcyclohexyl)benzene (CAS RN 91538-82-8) with a purity by weight of 95 % or more0 %-31.12.2025
0.8042ex 2910 90 0040[(2R)-Oxiran-2-yl]methyl 3-nitrobenzenesulphonate (CAS RN 115314-17-5) with a purity by weight of 97 % or more0 %-31.12.2025
0.8073ex 2912 19 0020Acrylaldehyde (CAS RN 107-02-8) with a purity by weight of 98 % or more0 %-31.12.2025
0.81472912 42 00Ethylvanillin (3-ethoxy-4-hydroxybenzaldehyde)0 %-31.12.2025
0.8058ex 2914 29 00454-Propylcyclohexan-1-one (CAS RN 40649-36-3) with a purity by weight of 95 % or more0 %-31.12.2025
0.8146ex 2915 90 7023Tin bis(2-ethylhexanoate) (CAS RN 301-10-0) with a purity by weight of 97 % or more0 %-31.12.2025
0.8057ex 2916 20 0045Cyclopentanecarboxylic acid (CAS RN 3400-45-1) with a purity by weight of 98 % or more0 %-31.12.2025
0.8039ex 2916 39 9078(2,5-dibromophenyl)acetic acid (CAS RN 203314-28-7) with a purity by weight of 98,0 % or more0 %-31.12.2025
0.8044ex 2918 19 9860(R)-tert-butyl 2'-(1-hydroxyethyl)-3-methyl-[1,1'-biphenyl]-4-carboxylate (CAS RN 1246560-92-8) with a purity by weight of 98 % or more0 %-31.12.2025
0.8075ex 2918 30 0045Methyl 5-oxo-6,7,8,9-tetrahydro-5H-benzo[7]annulene-2-carboxylate (CAS RN 150192-89-5) with a purity by weight of 96 % or more0 %-31.12.2025
0.8066ex 2918 99 90482-Bromo-5-methoxybenzoic acid (CAS RN 22921-68-2) with a purity by weight of 98 % or more0 %-31.12.2025
0.8045ex 2921 29 0015(2S)-propane-1,2-diamine dihydrochloride (CAS RN 19777-66-3) with a purity by weight of 98 % or more0 %-31.12.2025
0.8067ex 2921 29 0025N,N'-Diallylpropane-1,3-diamine dihydrochloride (CAS RN 205041-15-2) with a purity by weight or 96 % or more0 %-31.12.2025
0.8059ex 2921 49 0065Bis-(9,9-dimethylfluoren-2-yl)amine (CAS RN 500717-23-7) with a purity by weight of 95 % or more0 %-31.12.2025
0.8027ex 2924 19 0028(2S)-2-amino-5-(carbamoylamino)pentanoic acid ; 2-hydroxybutanedioic acid (2:1) (CAS RN 54940-97-5) with a purity by weight of 98 % or more0 %-31.12.2025
0.8030ex 2924 19 0033(2S)-2-amino-5-(carbamoylamino)pentanoic acid ; 2-hydroxybutanedioic acid (1:1) (CAS RN 70796-17-7) with a purity by weight of 98,5 % or more0 %-31.12.2025
0.8041ex 2924 19 0038Diethyl acetamidomalonate (CAS RN 1068-90-2) with a purity by weight of 98 % or more0 %-31.12.2025
0.8049ex 2924 19 0043N6-(tert-butoxycarbonyl)-L-lysine methyl ester hydrochloride (CAS RN 2389-48-2) with a purity by weight of 98 % or more0 %-31.12.2025
0.8043ex 2924 29 70582-chloro-N-[1-(4-chloro-3-fluorophenyl)-2-methylpropan-2-yl]acetamide (CAS RN 787585-35-7) with a purity by weight of 98 % or more0 %-31.12.2025
0.8060ex 2924 29 70785-amino-3-(4-chlorophenyl)-5-oxopentanoic acid (CAS RN 1141-23-7) with a purity by weight of 98 % or more0 %-31.12.2025
0.8033ex 2925 29 0060Formamidine acetate (CAS RN 3473-63-0) with a purity by weight of 99 % or more0 %-31.12.2025
0.8040ex 2925 29 0070Bromomethylidene(dimethyl)azanium bromide (CAS RN 24774-61-6) with a purity by weight of 97 % or more0 %-31.12.2025
0.8061ex 2928 00 9038Aqueous solution of methoxyammonium chloride (CAS-RN 593-56-6), containing by weight:

—30 % or more but not more than 40 % of methoxyammonium chloride

—not more than 4 % of hydrochloric acid
0 %-31.12.2025
0.8093ex 2928 00 90432-(3-methoxy-3-oxopropyl)-1,1,1-trimethylhydrazinium bromide (CAS RN 106966-25-0) with a purity by weight of 99 % or more0 %-31.12.2025
0.8036ex 2930 90 9811Benzyl (2S)-2-amino-3-[3-(methanesulphonylphenyl)]propanoate hydrochloride (CAS RN 1194550-59-8) with a purity by weight of 98 % or more0 %-31.12.2025
0.8047ex 2930 90 9814(E)-N'-(2-Cyano-4-(3-(1-hydroxy-2-methylpropan-2-yl)thioureido)phenyl)-N,N-dimethyl-formimidamide (CAS RN 1429755-57-6) with a purity by weight of 98 % or more0 %-31.12.2025
0.8050ex 2930 90 98194-Amino-5-(ethanesulphonyl)-2-methoxybenzoic acid (CAS RN 71675-87-1) with a purity by weight of 98 % or more0 %-31.12.2025
0.8069ex 2930 90 9828Mesotrione (ISO) (CAS RN 104206-82-8) in form of wet cake or wet paste, with

—a purity of 74 % or more but not more than 87 % by weight, and

—a maximum water content of 23 % by weight
0 %-31.12.2025
0.8051ex 2931 90 0023Ixazomib citrate (INNM) (CAS RN 1239908-20-3) with a purity by weight of 95 % or more0 %-31.12.2025
0.8063ex 2931 90 0028Triethoxy(3-isocyanatopropyl)silane (CAS RN 24801-88-5) with a purity by weight of 96 % or more0 %-31.12.2025
0.8035ex 2932 99 00381-Benzofuran-6-carboxylic acid (CAS RN 77095-51-3) with a purity by weight of 98 % or more0 %-31.12.2025
0.8046ex 2933 19 90481-(3-iodo-1-isopropyl-1H-pyrazol-4-yl)ethanone (CAS RN 1269440-49-4) with a purity by weight of 98 % or more0 %-31.12.2025
0.8068ex 2933 39 99304-amino-3-(4-phenoxyphenyl)-1-[(3R)-piperidin-3-yl]-1,3-dihydro-2H-imidazo[4,5-c]pyridin-2-one (CAS RN 1971921-35-3) mono oxalate with a purity by weight of the free base of 70 % or more0 %-31.12.2025
0.8072ex 2933 39 9975Clodinafop-propargyl (ISO) (CAS RN 105512-06-9) with a purity by weight of 90 % or more0 %-31.12.2025
0.8074ex 2933 39 9980Tert-Butyl (3R)-3-(4-amino-2-oxo-2,3-dihydro-1H-imidazo[4, 5-c]pyridin-1-yl)piperidine-1-carboxylate (CAS RN 1971921-33-1) with a purity by weight of 95 % or more0 %-31.12.2025
0.8096ex 2933 39 99891-Benzyl-4-phenylpiperidine-4-carbonitrile monohydrochloride (CAS RN 71258-18-9) with a purity by weight of 98 % or more0 %-31.12.2025
0.8037ex 2933 49 90552-(tert-butoxycarbonyl)-5,7-dichloro-1,2,3,4-tetrahydroisoquinoline-6-carboxylic acid (CAS RN 851784-82-2) with a purity by weight of 98 % or more0 %-31.12.2025
0.8056ex 2933 59 95422-Chloropyrimidine (CAS RN 1722-12-9) with a purity by weight of 98 % or more0 %-31.12.2025
0.8038ex 2933 79 00451-phenyl-3H-indol-2-one (CAS RN 3335-98-6) with a purity by weight of 99 % or more0 %-31.12.2025
0.8089ex 2933 99 80256-(4-Benzylamino-3-nitrophenyl)-5-methyl-4,5-dihydro-2H-pyridazin-3-one (CAS RN 77469-62-6) with a purity by weight of 95 % or more0 %-31.12.2025
0.8032ex 2933 99 80651,2,4-Triazole (CAS RN 288-88-0) with a purity by weight of 99 % or more0 %-31.12.2025
0.8053ex 2933 99 80695-Formyl-2,4-dimethyl-1H-pyrrole-3-carboxylic acid (CAS RN 253870-02-9) with a purity by weight of 96 % or more0 %-31.12.2025
0.8054ex 2933 99 80762-Methylindoline (CAS RN 6872-06-6) with a purity by weight of 98 % or more0 %-31.12.2025
0.8064ex 2933 99 80779-[1,1′-Biphenyl]-3-yl-9′-[1,1′-biphenyl]-4-yl-3,3′-bi-9H-carbazole (CAS RN 1643479-47-3) with a purity by weight of 95 % or more0 %-31.12.2025
0.8094ex 2934 99 90402,3-Pyrazinedicarboxylic anhydride (CAS RN 4744-50-7) with a purity by weight of 95 % or more0 %-31.12.2025
0.8031ex 2934 99 9055Uridine (CAS RN 58-96-8) with a purity by weight of 98 % or more0 %-31.12.2025
0.8048ex 2934 99 90811-(4-aminophenyl)-5-(morpholin-4-yl)-2,3-dihydropyridin-6-one (CAS RN 1267610-26-3) with a purity by weight of 98 % or more0 %-31.12.2025
0.8055ex 2935 90 90804-Chloro-3-sulphamoylbenzoic acid (CAS RN 1205-30-7) with a purity by weight of 97 % or more0 %-31.12.2025
0.8137ex 3208 90 19

ex 3911 90 99
13

63
Mixture, containing by weight:

—30 % or more but not more than 40 % of a copolymer of methyl vinyl ether and monobutyl maleate (CAS RN 25119-68-0),

—10 % or more but not more than 20 % of a copolymer of methyl vinyl ether and monoethyl maleate (CAS RN 25087-06-3),

—40 % or more, but not more than 55 % of ethanol (CAS RN 64-17-5),

—1 % or more but not more than 7 % of butan-1-ol (CAS RN 71-36-3)
0 %-31.12.2025
0.8083ex 3824 99 9292Solution consisting of:

—50 (± 2) % by weight sodium mentholate (CAS RN 19321-38-1), and

—50 (± 2) % by weight light aliphatic solvent naphtha (petroleum) (CAS RN 64742-89-8)
0 %-31.12.2025
0.8121ex 3824 99 9293Solution of not more than 15 % by weight of lithium hexafluorophosphate (CAS RN 21324-40-3) in a mixture of ethylene carbonate (CAS RN 96-49-1), dimethyl carbonate (CAS RN 616-38-6) and ethyl methyl carbonate (CAS RN 623-53-0), contains organic carbonate derivatives as additives3.2 %-31.12.2021
0.8062ex 3824 99 9351Tris(hydroxymethyl)phosphine oxide (CAS RN 1067-12-5) with a purity by weight of 85 % or more0 %-31.12.2025
0.8122ex 3824 99 9668Lithium nickel dioxide (CAS RN 12325-84-7) containing by weight:

—less than 5 % of lithium hydroxide (CAS RN 1310-65-2),

—less than 5 % of lithium carbonate (CAS RN 554-13-2), and

—less than 15 % of nickel oxide (CAS RN 11099-02-8)
3.2 %-31.12.2021
0.8125ex 3902 30 0020Hydrogenated block copolymer of styrene and isoprene (CAS RN 68648-89-5), containing by weight less than 37 % of styrene0 %-31.12.2025
0.8126ex 3905 91 0050Aqueous solution consisting by weight of:

—10 % or more but not more than 20 % of a copolymer of vinyl pyrrolidone, N,N-dimethylaminopropyl methacrylamide and 3 (methacryloylamino)propyllauryldimethylammonium chloride (CAS RN 306769-73-3),

—not more than 1 % preservatives
0 %-31.12.2025
0.8145ex 3905 91 0060Copolymer of vinylpyrrolidone, vinyl caprolactam and dimethylaminoethyl methacrylate (CAS RN 102972-64-5) in solid form, or as an aqueous solution containing by weight:

—27 % or more but not more than 33 % of copolymer,

—not more than 1,5 % of ethanol (CAS RN 64-17-5),

—not more than 1 % of preservatives
0 %-31.12.2025
0.8138ex 3905 91 0070Aqueous solution, containing by weight:

—25 % or more but not more than 35 % of a copolymer of vinyl caprolactam, vinyl pyrrolidone, N,N-dimethylaminopropyl methacrylamide and 3-(methacryloylamino)propyllauryldimethylammonium chloride (CAS RN 748809-45-2),

—10 % or more but not more than 16 % of ethanol (CAS RN 64-17-5) whether or not denatured with tert-butyl alcohol (CAS RN 75-65-0) and/or denatonium benzoate (CAS RN 3734-33-6)
0 %-31.12.2025
0.8139ex 3905 91 0080Copolymer of vinylpyrrolidone, acrylic acid and dodecyl methacrylate (CAS RN 83120-95-0)0 %-31.12.2025
0.8097ex 3910 00 0075Copolymer of 80 % dimethylsiloxane, 10 % methyl methacrylate and 10 % butyl acrylate in the form of a white powder0 %-31.12.2025
0.8116ex 3917 31 00

ex 3917 32 00

ex 3917 39 00
30

20

20
Tubings:

—with an outer diameter of 0,33 mm or more but not more than 3,3 mm,

—with an inner diameter of 0,01 mm or more but not more than 2,1 mm,

—suitable for a maximum working pressure rate from 2,7 MPa up to 70 MPa,

—suitable for all solutions used in chromatography,

—whether or not with fused silica,

—whether or not covered with PEEK,

for use in chromatographic system (2)
0 %-31.12.2021
0.8117ex 3917 40 0020Plastic fittings (kit of nuts and ferrules or nuts) and connectors:

—threaded,

—supported with or without a stainless steel ring,

—suitable for a maximum working pressure rate of 2,7 MPa or more but not more than 114 MPa,

for tubings with:

—outer diameter of 0,33 mm or more but not more than 3,3 mm,

—suitable for a maximum working pressure rate of 2,7 MPa or more but not more than 114 MPa,

—suitable for all solutions used in chromatography,

for use in the production of chromatographic systems (2)
0 %-31.12.2021
0.8109ex 3919 10 8048Plastic strips of polypropylene,

—self-adhesive,

—unilaterally adhesive-coated with an Acrylic Polymer,

—in rolls with a width of 20 cm or less,

—with a thickness including adhesion layer of 0,03 mm or less,

for use in the manufacturing of lithium-ion electric rechargeable batteries (2)
3.2 %-31.12.2021
0.8149ex 3920 10 8945Octene and ethylene copolymer plastic film of a thickness of 0,45 mm or more but not more than 0,75 mm, for use in the manufacture of glass to glass photovoltaic solar panels (2)0 %-31.12.2022
0.8118ex 3926 90 9758Plastic ferrules and/or plugs:

—supported with or without a stainless steel ring,

—suitable for a maximum working pressure rate of 2,7 MPa or more but not more than 114 MPa,

for tubings with:

—outer diameter of 0,33 mm or more but not more than 3,3 mm,

—suitable for a maximum working pressure rate of 2,7 MPa or more but not more than 114 MPa,

—suitable for all solutions used in chromatography,

for use in the production of chromatographic systems (2)
0 %-31.12.2021
0.8108ex 5403 31 0010Continuous viscose rayon filament yarn of 105 dtex or more but not more than 117 dtex, and consisting of 36 monofilaments or more but not more than 40 monofilaments0 %-31.12.2025
0.8105ex 8108 90 3055Wires of an alloy of titanium:

—with a niobium content by weight of 42 % or more but not more than 47 %,

—with a diameter of not more than 6 mm,

—complying with standard AMS 4982,

for use in the production of aerospace fasteners (2)
0 %-31.12.2025
0.8148ex 8412 90 8020Bedplate made of solution strengthened ductile iron castings (SSDI), for anchoring and aligning the drive train (gearbox, pedestal bearing, rotor shaft) of a wind turbine with:

—a length of 3,5 m or more but not more than 4,3 m,

—a width of 2 m or more but not more than 3,5 m,

—a height of 1 m or more but not more than 1,3 m,

—a weight of 11 tons or more but not more than 20 tons,

—mounting bores for yaw drive,

—mounting flange for gearbox support,

—drivetrain mount,

—different screw sockets
0 %p/st31.12.2025
0.8079ex 8412 90 8030Gearbox support used as a support and load-carrying component between the gearbox and the bedplate of a wind turbine, made of solution strengthened ductile iron castings (SSDI), with:

—a diameter of 2 m or more, but not more than 5 m,

—a weight of 2 tons or more but not more than 7 tons
0 %p/st31.12.2025
0.8111ex 8414 30 2020Hermetic reciprocating refrigeration compressor, for isobutane:

—with a 3-phase permanent magnet brushless motor,

—having left side suction connection and Power Factor Correction (PFC) inverter,

—with a maximum cooling capacity of 150 W or more but not more than 240 W, at ASHRAE conditions
0 %-31.12.2025
0.8112ex 8414 30 2030Hermetic reciprocating refrigeration compressor for isobutane as refrigerant:

—with a 3-phase permanent magnet brushless motor,

—having left side suction connection and Power Factor Correction (PFC) inverter feasible to work from 1 300 rpm up to 4 500 rpm,

—with a maximum cooling capacity of 150 W or more but not more than 240 W, at ASHRAE conditions
0 %-31.12.2025
0.8134ex 8414 30 2040Hermetic reciprocating compressor, for isobutane as refrigerant with:

—a Resistance Start Capacitor Run (RSCR) single phase motor,

—a general coefficient of performance factor not lower than 1,93 at ASHRAE conditions,

—a maximum cooling capacity of 150 W or more but not more than 180 W, at ASHRAE conditions
0 %-31.12.2025
0.8135ex 8414 30 2050Hermetic reciprocating compressor, for isobutane as refrigerant with:

—a Resistance Start Capacitor Run (RSCR) single phase motor,

—a general coefficient of performance factor not higher than 1,5 at ASHRAE conditions,

—a maximum cooling capacity of 150 W or more but not more than 180 W, at ASHRAE conditions
0 %-31.12.2025
0.8133ex 8414 80 7340Hermetic heat pump compressor, for R134A or R450A as refrigerant:

—with the Single Phase Induction Motor PSC (Permanent Split Capacitor),

—having bottom side suction connection and top side discharge connection,

—8,1 cm3 or 8,2 cm3 displacement,

—running at 3 000 rpm,

—with a cooling capacity of 920 W or higher, but not higher than 970 W in ASHRAE conditions
0 %-31.12.2025
0.8123ex 8479 89 9728Integrated electric brake unit for immediate generation of the hydraulic pressure during braking, full electronic brake control and enabling regenerative braking of motor vehicles with:

—electronic brake assistants,

—hydraulic unit driven by brushless electric motor,

—brake fluid reservoir,

for use in the manufacture of plug-in hybrid passenger cars (2)
0 %-31.12.2025
0.7962ex 8479 90 7050Rotor part of the mechanical unit ensuring the movement of the camshaft compared to the crankshaft:

—with 4 blades that end in grooves,

—made of steel alloy with sintering process
0 %-31.12.2025
0.8098ex 8482 50 0020Axial roller bearing made of steel:

—the retainer is made of cold-rolled steel with a carbon content of up to 0,25 percent, complying with standard ASTM A109-98,

—the rollers are made of anti-friction steel according to ASTM 295-94,

—with an external diameter of 63 mm or more but not more than 66 mm,

—with an internal diameter of 44 mm or more but not more than 46 mm,

—with a weight of 23 g or more but not more than 27 g,

—with 36 rollers or more but not more than 38 rollers
0 %p/st31.12.2025
0.8088ex 8482 99 0040Inner and outer rings made of steel, not grinded, with an internal raceway, with diameters of:

—14,66 mm or more but not more than 76,2 mm for the inner ring, and

—26 mm or more but not more than 100 mm for the outer ring
0 %-31.12.2025
0.8100ex 8483 50 8020Pulley blocks of non-cast steel:

—made of structural carbon steel complying with standard JIS G4051,

—with an external diameter of 114 mm or more but not more than 118 mm,

—with an internal diameter of 33 mm or more but not more than 37 mm,

—with a width of 29 mm or more but not more than 33 mm,

—with a weight of 0,6 kg or more but not more than 0,9 kg,

—with 6 trapezoidal grooves
0 %p/st31.12.2025
0.8130ex 8501 62 0040AC, 3-phase generator, with:

—a continuous power of 147 kVA or more but not more than 222 kVA,

—a continuous torque of 650 Nm or more but not more than 900 Nm,

—a maximum working speed of 2 700 revolutions per minute (rpm),

—a liquid cooled system,

—a length of 100 mm or more but not more than 200 mm,

—a width of 550 mm or more but not more than 650 mm,

—a height of 550 mm or more but not more than 650 mm,

—weighing of not more than 150 kg
0 %-31.12.2025
0.8095ex 8505 90 9020Electromagnetic clutch coil in a cylindrical metal housing:

—the metal housing is made of hot-rolled steel complying with standard JIS G 3131 - SPHE,

—the coil is made of copper wire,

—with a weight of 0,4 kg or more but not more than 0,7 kg,

—with a width of 22 mm or more but not more than 25 mm,

—with a plate reinforced to the coil (coil backplate) with an internal diameter of 44 mm or more but not more than 46 mm,

—with an external diameter of 88 mm or more but not more than 96 mm,

—without plunger,

—with one connector
0 %p/st31.12.2025
0.8115ex 8507 60 0048Integrated battery system in a metal case with holders, consisting of:

—a lithium-ion battery with a voltage of 36 V or more but not more than 50,4 V and a nominal energy of 0,6 kWh,

—Battery Management System,

—a power relay,

—a cooling system,

—four connectors,

for use in the manufacture of Mild-hybrid (mHEV) motor vehicles (2)
1.3 %-31.12.2021
0.8140ex 8529 90 9273CMOS-Image sensor

—with a micro lens on every pixel (micro lens coverage at least 99 % of all pixel),

—to capture infra-red light reflected from objects,

in order to capture depth images in the cameras built for distance measurements (Time-of-Flight)
0 %-31.12.2025
0.8085ex 8537 10 9145Main hybrid system controller, diagnosing and controlling the elements of the hybrid propulsion system, with:

—a programmable memory,

—a microprocessor,

—at least one composite connector,

—a voltage of 24 V,

—with a length of 350 mm or more but not more than 400 mm,

—with a width of 200 mm or more but not more than 250 mm,

—with a height of 80 mm or more but not more than 120 mm,

—in a metal housing
0 %-31.12.2025
0.8132ex 8537 10 9880Propulsion Control System with at least:

—a DC/AC inverter,

—a power of 190 kW or more but not more than 220 kW,

—a high voltage circuits with AC and DC interfaces for connecting a traction motor, generator and energy storage system,

—an integral control of all drive motor and generator traction system functions,

—a CAN communications interface with System Control Unit,

—a liquid cooled system,

—a length of 300 mm or more but not more than 950 mm,

—a width of 350 mm or more but not more than 600 mm,

—a height of 200 mm or more but not more than 350 mm,

—a weight of 40 kg or more but not more than 90 kg
0 %p/st31.12.2025
0.8124ex 8537 10 9888Control panel for car radio and/or navigation control with:

—electronic passive components,

—at least two switches,

—LEDs,

—at least one connector,

—whether or not warning triangle switch,

—for a voltage not exceeding 16 V,

for use in the manufacture of goods of Chapter 87 (2)
0 %-31.12.2025
0.8127ex 8708 99 9728A set of Type 4 H2 cylinders, in accordance with the EC 79 standard, consisting of two to eight cylinders on aluminum frames:

—cylinders made of high density polyethylene (HDPE) composite reinforced with a braid of glass and carbon fibers in epoxy resin,

—with an operating pressure of not less than 35 MPa,

—with a durability declared by the manufacturer of not less than 20 years,

—with a cylinder capacity of 180 liters or more but not more than 375 liters,

—equipped with a set of solenoid, manual and safety PRD valves,

—with a total width of 1 800 mm or more but not more than 2 300 mm,

—with a total height of 400 mm or more but not more than 500 mm,

—with a total length of 1 200 mm or more but not more than 3 600 mm
0 %-31.12.2025
0.8128ex 8708 99 9738A set of Compressed Natural Gas (CNG) cylinders type CNG-4, in accordance with the ECE R110 standard, consisting of four or five cylinders on aluminum frames:

—made of high density polyethylene (HDPE) composite reinforced with a braid of glass and carbon fibers in epoxy resin,

—with an operating pressure of not less than 20 MPa,

—with a shelf life declared by the manufacturer of not less than 20 years,

—with a cylinder capacity of 315 liters or more but not more than 375 liters,

—equipped with a set of solenoid, manual and safety PRD valves,

—with a total width of 2 200 mm or more but not more than 2 300 mm,

—with a total height of 450 mm or more but not more than 460 mm,

—with a total length of 3 500 mm or more but not more than 3 600 mm
0 %-31.12.2025’


(1) Suspension of duties is subject to end-use customs supervision in accordance with Article 254 of Regulation (EU) No 952/2013 of the European Parliament and of the Council of 9 October 2013 laying down the Union Customs Code (OJ L 269, 10.10.2013, p. 1).’;

(2) Suspension of duties is subject to end-use customs supervision in accordance with Article 254 of Regulation (EU) No 952/2013 of the European Parliament and of the Council of 9 October 2013 laying down the Union Customs Code (OJ L 269, 10.10.2013, p. 1).’.